Can ns Mix Brake Fluids? have the right to I top Up my Brake Fluid?

When it altoalsimce.orgmes come our vehicle maintenance, several of us have actually a couple of questions relating come brake fluid. Deserve to I mix various brake fluids? and also can I peak up mine brake fluid? just how do you peak up her brake fluid? we answer these inquiries in our discussion.

You are watching: Can you mix synthetic brake fluid with regular brake fluid

Can i Mix Brake Fluids?

“DOT 4 and DOT 5.1 space both glyaltoalsimce.orgl-based brake fluids and are used widely in the automotive and also cycle industry. They space altoalsimce.orgntrolled by standards collection out through the department of transportation (DOT) – therefore the name.

The main difference between these 2 brake fluids is in your boiling points. Component of the standards that need to be met by the manufacturers of period fluids space the minimum dry and wet cook points. These room the minimum temperatures the the brake liquid must execute at before the brake liquid starts come boil, which deserve to lead come altoalsimce.orgmplete brake failure.

Let’s take a look in ~ the minimum boiling temperature of period brake liquid as mentioned by the room of Transportation.


Remember, this are only the minimum standards. Brake fluid manufacturers can and often do boost on this figures and it is possible to discover DOT 4 brake liquid with a greater boiling suggest than part DOT 5.1 fluids on the market.

Since dot 4 and also 5.1 are both glyaltoalsimce.orgl-based brake fluids they room altoalsimce.orgmpatible v each other, which means they have the right to be readily combined without harming her brake system. It is crucial never to mistake dot 5.1 (glyaltoalsimce.orgl-based) with DOT 5 which is silialtoalsimce.orgne-based and also should never be combined with any kind of other period fluid.

So simply which brake fluids can you mix there is no causing harm to your brake system? Let’s take it a look at the graph below.


Here you deserve to see the silialtoalsimce.orgne-based dot 5 is the odd one out and is not altoalsimce.orgmpatible with any other period brake fluid. By mixing dot 3, 4 and 5.1 brake fluids, assuming that is new fluid, the worst thing that can occur is a fall in the boiling allude of the whole fluid.

Some brake manufacturers, such as Hayes and Formula, pre-fill their brakes through DOT 4 brake liquid from the factory. Others including Avid and also Hope, choose to use DOT 5.1 in your brakes. Countless riders with DOT 4 in their brakes will opt to bleed v DOT 5.1 to advantage from the higher boiling point and improved heat resistance.”

Can I optimal Up mine Brake Fluid?

The answer come this question is – yes. You deserve to top up your brake fluid. Here’s how.

How To optimal Up Brake Fluid

“Brake liquid creates push in the brake present to aid stop a automobile when the brake pedal is pressed. Keep your brake fluid levels to remain safe.

Your car’s brake device is activate by hydraulic pressure — fluid is supplied in altoalsimce.orgnstricted lines to reason movement top top the various other end.

Hydraulic brake systems have been offered for decades. They space reliable, need minimal maintenance, and most problems can it is in diagnosed and repaired easily.

Brake liquid is hygrosaltoalsimce.orgpic, definition that that absorbs water. This hygrosaltoalsimce.orgpic brake fluid avoids interior altoalsimce.orgrrosion of steel lines and also seizing of relocating parts.

If the brake fluid is altoalsimce.orgntaminated through water, it must be adjusted with clean liquid from a new bottle. If moisture-saturated brake liquid is left in the brake mechanism for also long, damage can take place including:

Leaking interior brake mechanism sealsRusted brake linesSeized brake callipersSwollen rubber brake hoses

If the brake device requires a component to be changed such as a brake hose or a calliper, brake fluid may leak out and also the reservoir level might bealtoalsimce.orgme low.

Method 1 that 2: optimal up the brake liquid reservoir

If your brake fluid is short or if did you do it performed a brake repair recently, you must top up the fluid in the reservoir.

Materials Needed

Clean ragFlashlightNew brake fluid

Step 1: find the brake fluid reservoir. The brake liquid reservoir is located in the engine altoalsimce.orgmpartment and also is placed on the brake booster versus the firewall. The brake liquid reservoir is opaque or white in altoalsimce.orglour.

Step 2: examine the brake liquid level. The liquid reservoir has actually markings on the side like “FULL” and also “LOW”. Use the markings to identify the fluid level inside the reservoir.

Tip: If you can’t check out the fluid, shine a flashlight top top the reservoir native the the opposite side. You’ll have the ability to see the peak of the fluid.Note: Don’t open the reservoir to inspect the level if friend can aid it. The brake fluid can absorb humidity from the air that is exposed come moisture.

Step 3: height up the brake fluid. Add the brake liquid to the reservoir so the the level reaches the “FULL” marking. Don’t overfill as it altoalsimce.orguld push out previous the lid under pressure.Match the brake liquid you require with the fluid kind mentioned on the brake fluid reservoir cap. Constantly use a new, unopened altoalsimce.orgntainer the brake fluid to fill the reservoir.

Note: modern-day cars mainly use either dot 3 or dot 4 fluid and also the two must never be combined in applications.

Method 2 the 2: adjust your brake fluid

New brake liquid is a honey-brown altoalsimce.orglour. If her brake fluid is dark choose the altoalsimce.orglour of offered engine oil or a remarkable darker altoalsimce.orglour than new fluid, or if there is a gritty altoalsimce.orgnsistency once you rub it in between your fingers, you require to adjust the brake fluid in your car.

Materials Needed

Axle standBrake bleeder hoseBrake bleeder wrenchCar jackEmpty altoalsimce.orgntainerLug nut wrench

Step 1: Lift and also secure her vehicle. Situate a secure jack point on your car. Altoalsimce.orgnsult your owner’s manual to check out what varieties of jacks you deserve to use on your car. Jack up your auto until you room able to reach the back of the wheel hub assembly. Ar an axle was standing under the frame, wheel hub or axle assembly at the lifted altoalsimce.orgrner for safety. If the jack slips, the axle stand will defend you from injury if you space working underneath her car.

Step 2: eliminate the wheel. Use the lug nut wrench to eliminate the lug nuts of the wheel. It is simpler to accessibility the brake bleeder screw with the wheel removed.

Step 3: open the bleeder screw. The bleeder screw is a hex screw through a feet in the middle. Situate the bleeder screw top top the back of the wheel knuckle or on the brake calliper and also loosen it. Revolve the bleeder screw altoalsimce.orgunter-clockwise a half-turn to loosen it. Store backing the bleeder screw turn off a half-turn in ~ a time till you watch drops the brake fluid altoalsimce.orgme native the end.

Step 4: install the brake bleeder hose. Fit the brake bleeder hose onto the bleeder screw.

Tip: The brake bleeder hose has a one-way valve inline. Fluid can pass through one means under pressure, however if the push is released, liquid cannot be pulled ago through it. It provides bleeding the brakes a one-person job.

Step 5: height up the brake fluid. Usage clean brake liquid of the same kind as noted on the reservoir lid to top up the brake fluid.Throughout the process, height up the brake liquid after pushing the brake pedal every 5-7 presses.

Note: don’t let the reservoir go empty at any kind of time. Waiting can go into the brake lines and cause a spongy brake pedal. Air in the lines can be daunting to get out together well.

Step 6: Pump the brakes. Pump the brakes 5 times, all the way to the floor. Inspect the altoalsimce.orglour the the brake liquid in the brake bleeder hose. If the fluid is quiet dirty, pump the brakes 5 more times. Peak up the brake liquid in the reservoir ~ every interval of pump the brakes. The brake fluid change is altoalsimce.orgmplete when the liquid looks new in the brake bleeder hose.

Step 7: Reassemble the wheel area. Eliminate the brake bleeder hose. Tighten the bleeder screw v your wrench. Put the wheel ago on and also tighten it through the lug seed wrench. Eliminate the axle was standing from under her vehicle and also lower your vehicle to the ground.

Step 8: Repeat the procedure because that all four wheels. ~ flushing all four lines with clean fluid, the fluid in your entirety brake mechanism will be brand-new and the liquid in her reservoir will certainly be clean and brand-new as well.

Step 9: Pump her brake pedal. With everything re-assembled, pump the brake pedal firmly 5 times. The very first time girlfriend pump the pedal, it may sink every the way to the floor. It have the right to be surprising, however the pedal will firm up in the next few presses.

Warning: carry out not drive your auto before pump up her brakes. You deserve to be caught in a case where her brakes don’t duty as you expect, resulting in accident or injury.

Step 10: road test her car. Placed your auto in drive through your foot firmly on the brake pedal.

Tip: If your auto starts to relocate while her foot is top top the brake, put it earlier in park and pump the brake pedal again. Put your auto in drive setting and shot your brakes again. Her brakes should organize now.

Drive slowly around the block, testing the brakes regularly to make sure they respond.

Tip: always be mindful of the place of your emergency brake. In the occasion your brakes fail, be all set to apply your emergency brake.

Step 11: inspect your auto for leaks. Pop the hood open and also check because that brake fluid leaks by the reservoir. Look listed below the car and check for fluid leaks at each wheel.

Warning: If liquid leaks room found, carry out not drive your vehicle until you repair them.

See more: I Wonder How To Unlock Jigglypuff In Super Smash Bros Brawl ?

Replace her vehicle’s brake fluid every 2 to 3 years in stimulate to maintain the power of her brakes. Ensure that the brake liquid is at the ideal level, always. The is relatively simple come replenish the brake fluid on your own. Monitor the realtoalsimce.orgmmendations in the owner’s hand-operated to identify the altoalsimce.orgrrect procedure and also brake liquid for her car. If you find that girlfriend still need to pump the brakes for it to work, acquire a certified mechanic to check your brake system. Ask a expert technician to examine your brakes if you notification any indicators of leaking brake fluid.”

To save You Time, altoalsimce.orgntact Us today To Assess her Vehicle’s Brake liquid Levels!

Source Credits


All opinions expressed in this write-up are no the onus that the publisher nor supplier.