Sometimes it’s just an ext practical to tackle welding work in the field instead of the convenience of your shop.

You are watching: How big of a generator do i need to run a welder

Today’s generators and welders are much more powerful and portable, do it less complicated than ever to weld at remote locations, yet what dimension generator because that welding is ideal for you?

Jump to:


Get the ideal Amperage Value

Depending on the welder, you may find a grasp of various amp ratings, or simply one.

Look for the I1max number. That the best rating come use since it represents the maximum rated it is provided current. You may see this referred to as the preferably “inrush” or “surge” current draw top top startup.


Using the specs Lincoln offers us:

20 amps x 120 volts = 2400 watts

But I’ve seen Lincoln representatives say this welder requires, at a minimum, a 3000 watt generator. And 3000 watts divided by 120 volts offers us 25 amps, i m sorry is most likely closer come the I1max rating for this machine.

The recommended circuit breaker size may be too small to calculate complete operating wattage. A appropriately operating circuit breaker is designed with a time hold-up and probably wouldn’t trip because of a short 25 amp surge.

But this would reason a difficulty on a generator through a rise rating of 2400 watts.

Finally, don’t make the failure of making use of output amperage figures such together I2 or duty bicycle amperage.


Here are power needs for usual devices:

ApplianceRunning WattsStarting Watts
Coffee Maker17500
625W Microwave625800
Single 60W identical CFL bulb150
Room wait Conditioner: 10,000 BTU15002200
Small Appliance2001700
8in. Bench Grinder14002500
Pressure Washer: 1 HP12003600
7-1/4in. One Saw14002300
Electric Chain Saw: 14in. Bar, 2 HP11000
10in. Table Saw18004500
Drill: 3/8in., 4 Amps440600
Drill: 1/2in., 5.4 Amps600900
Portable Heater (Kerosene, Diesel Fuel): 90,000 BTU500725
Battery Charger: 60 Amp v 250 Amp Boost1500/57500
LCD computer system Monitor250
Inkjet Printer150
Cell call Charger100

“Dirty” vs. Clean strength Generators for Welders

Welder internal power sources fall into two distinct architecture categories, each handling incoming existing in different ways to produce weldable strength output.

Inverter-Style Welders

With an innovation to produce efficient welding power with much smaller transformers, inverter welders regularly weigh much less than half of classic welders. They attain a an extremely stable output thanks to capacitors that save high voltages.

But these advanced electronics need quality entry power.

Many generators create excessive voltage and frequency fluctuations well-known as “dirty power”. That measured as a percent of full Harmonic Distortion, or THD. Dirty power deserve to quickly ruin sensitive electronics or shorten company life with cumulative damage.

Particularly sensitive space older inverter welders using metal-oxide semiconductor field-effect transistor (MOSFET) technology.

See more: Compare & Buy The Sims 3 Ambitions Serial Code, How Do I Find A Sims 3 Ambitions Serial Code

Newer machines based on insulated-gate bipolar transistors (IGBT) fare better, yet still require a clean strength generator through 5% or less THD.

Here’s a video clip showing a Lincoln 180 MIG welder to run on a 7250-watt generator: