Your Chevy S10‘s brake light indicator is there to permit you recognize that there is an concern with the brake system. It is various than the anti-lock brake system, which gets its own ABS warning light. The brake light shows that there is a problem with the physical braking system itself.

You are watching: S10 parking brake light stays on

If girlfriend are analysis this write-up trying to figure out whether you have to drive her vehicle, inspect the emergency brake first. If it’s engaged, the brake light will stay lit. If the take care of isn’t every one of the means down, it’ll cause the brake warning irradiate to stay on. Check to make certain that there isn’t the tiny bit left the it demands to revolve the brake irradiate off.

Now if the emergency brake didn’t solve the situation, it’s time come look right into what is leading to your S10’s brake warning irradiate to remain on. The brake light is maybe the most vital warning irradiate of all. We do not recommend driving through this irradiate on in ~ all. Doing so may lead to injury once the brakes fail.


Chevy S10 Brake Warning irradiate Causes

The brake warning light indicates that her S10 has actually detected that among its significant brake materials has failed, generally detected v a lose of pressure. You’ll feeling a ns of pressure that manifests chin in the kind of a “mushy” brake pedal.

If the brake irradiate is just coming on once you press the brakes, that’s a definite indication the the push in the brake mechanism is too low. Either the brakes need bled, or there is a leak.

Brake liquid Leak

Since you’ve currently checked the emergency brake handle, now it’s time to examine the master cylinder and also see if the brake liquid is short or not. Currently if it is low, but not empty, adding much more may administer a short-lived fix.

If the brake fluid looks like it is all the means out, you’ll need to include more, bleed the brakes, and also ideally fix the difficulty so the you aren’t repeating every one of this again. If the brake fluid is leaking the end over the brake pads and shoes, it way poor brake performance.

Just remember, it had actually to leak the end somewhere, and also that including fluid without solving the difficulty is just a short-lived solution. The leak can gain worse end time and lead to brake failure.


Pressure Differential Switch

Your brake device is split into 2 circuits. These circuits reduced the brake system in two. The way, if the brake mechanism gets a leak or fails, girlfriend still have actually brakes on fifty percent of your S10’s wheels.

The pressure differential switch procedures the distinction in pressure between the 2 circuits and also will report that there is a difference by transforming on your S10’s brake warning light. In many vehicles this move is located in the grasp cylinder. You’ll view a harness plugin somewhere about there.

Check the Brake Lights

Some vehicles will currently activate the brake warning light on the dash if the actual brake lights behind it go bad. Inspect to view that both that them are lighting up. If not, try replacing the bulb and also see if the solves the problem.

How to rotate off her S10’s Brake Light

The only method to rotate the brake light off is to restore proper line press to both brake circuits once the pedal is pushed. If her S10 is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have actually it towed to a mechanic. If you chaos up fixing your engine, the vehicle does no move. If you chaos up addressing the brakes, the doesn’t stop. That’s infinitely more dangerous.

See more: Im Deeply In Love With You What It Was Like To Fall Madly In Love


If your Chevy S10’s brake warning irradiate is on, and you’ve checked the emergency brake, you’ll have to look for a leak in the lines, calipers, wheel cylinders, grasp cylinder, etc. Good luck diagnosing the issue. If over there is anything that you would favor to add, please leaving a comment below.